Daily maintenance of dispensing machine

The daily maintenance of the dispensing machine directly affects the service life of the dispensing machine. The daily maintenance work of the dispensing machine has a great impact on the service life of the dispensing machine, including the smoothness of the usual use process. The following are the daily maintenance steps of the dispensing machine:

1, replace the rubber, need to clean the pipeline. At this point, close the feed valve, open the discharge valve, discharge the remaining rubber in the rubber bucket, close the discharge valve, open the feed valve and pour the cleaning solvent into the rubber storage bucket, activate the body, press the solvent out and rinse according to the usual operation method.

2. If the air pressure intake is abnormal and water vapor is found, please remove the water vapor in the pressure regulating filter or check whether the air pressure source is abnormal. Dispensing machine in glue before a large number of use, please first small trial, master the use of the product skills, so as not to make mistakes, when the test is no problem, then use double liquid drop glue machine or double liquid glue filling machine for mass production; Vacuum system for glue vacuum defoaming treatment, in order to exclude the mixing process of bubbles, or stand for 10-20 minutes before use, in order to make the mixing of bubbles in time to eliminate, mixed together the amount of glue.

3. Clean the part of the machine regularly to increase the service life. The more the amount of glue is mixed together, the faster the reaction will be, and the faster the curing speed will be. Therefore, it is necessary to reasonably match the glue according to the actual production situation, otherwise it will cause the waste of glue. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields of modern industry.

4. When the machine is out of service for a long time, the power should be unplugged, which can not only prolong the life of the machine but also save a lot of electricity. With the changing needs of industrial development, liquid control technology and dispensing equipment are also constantly developing to ultra-high precision control and diversification and specialization.

Note: after each use, do a good job of cleaning, wipe the place where you can see it, wipe it with alcohol, the part of regular exercise is best to point oil or butter, keep lubrication, if you do not have to put the glue light for a long time, otherwise solidified in the LED dispenser, and need money to clean up, very troublesome.